Click To Call(656) 254-3751Click To Get A Free Estimate
Sealed brick paver driveway at a home in Lithia

Paver sealing for Lithia homes

Paver Sealing in Lithia, FL

Rust dots and green joints on a Lithia driveway get a free paver sealing estimate when you call (656) 254-3751.

  • Brings out deeper paver color
  • Fresh joint sand helps lock pavers in place
  • Gives weeds less room to grow
  • Makes the surface easier to keep clean
  • Free estimate, no obligation

Request a Free Estimate

Free, no obligation.

Step 1 of 2

Where are your pavers?

Please choose one.

Free EstimateNo obligation
Fast ReplyWithin 1 business day, usually much sooner
Typical Local Price$1.50 to $2.50 a sq ft to clean, sand and seal
Call Now(656) 254-3751
Paver sealing

Fast, careful paver sealing in Lithia

Paver sealing is available across Lithia, from the FishHawk Ranch streets to the rural lots near the Alafia River. The work covers a wash, new joint sand and a coat of sealer on drives, lanais and pool decks, and the quote is free. Calling (656) 254-3751 should bring an answer within 1 business day, usually much sooner.

Think of the long drive up to your house, with orange dots along one edge, green creeping into the joints and the color gone flat. A wash, fresh sand and a new coat bring the pavers back to one even shade. You can request a free quote to describe your drive, lanai or pool deck, with no obligation.

Call (656) 254-3751

Family relaxing by a sealed paver pool deck near Lithia
Why hire local

Why hire a local paver sealing contractor in Lithia?

Out in Lithia the questions are about wells, acreage and community rules, and a local contractor already knows to ask them. To go over yours, request a free quote.

A free look at the lot

The contractor measures the drive, lanai and pool deck, then writes the price down. The visit is free.

A price you can test

Tampa Bay companies publish $1.50 to $2.50 per square foot to clean, sand and seal. Test any Lithia bid against it.

HOA paperwork

Many communities here set exterior rules. Get the product name and a written scope to send your board.

Take your time

You choose the day and the finish. Nothing begins until you accept the written price.

Get Your Free Estimate in Lithia

Tell us about your pavers in Lithia.

Call (656) 254-3751

Free, no obligation

Paver joint sand detail on a walkway near Lithia
Common problems

What paver problems show up most in Lithia?

Rust dots from well sprinklers

Lithia has farms, big lots and plenty of homes watered from wells. Iron is high in most Florida well water, University of Florida extension says, and using it on a lawn can leave orange streaks. Look along a driveway or pool deck for dots that follow the spray. The stain has to come out before sealing, since sealer would lock it under the coat. Turning sprinkler heads away from the pavers helps new marks stay off. On a large lot the spray arcs cover a lot of ground. Check the front walk, the garage apron and the pool edge, not just the drive. With strawberry, citrus and blueberry growers nearby, irrigation is part of life in Lithia.

Green film on lots backing onto preserves

The Alafia River Corridor covers 2,963 acres in Lithia, and Chito Branch Reserve covers 5,515 more. Homes next to that much green land get shade, leaves and damp air. Algae grows on pavers only where shade is heavy and the surface stays wet. A north-facing walkway under old trees is the kind of spot that turns green first. Leaves and pollen collect in the same damp spots. A wash clears the film, and a fresh coat helps the surface shed water. Together, the Alafia River Corridor and Chito Branch Reserve cover more than 8,000 acres, so shade and damp reach many back yards.

Low ground by the springs and river

Lithia sits as low as 8 feet above sea level near Lithia Springs and as high as 105 feet farther out. The Alafia floods at a moderate to high level about twice a year. Low lots hold water longer after a storm. That means pavers there stay damp, grow film faster and wait longer for a dry day before sealing. Pavers near the springs and the river deserve a slow, careful dry check before any sealer goes down. Sealer put on a wet surface can turn cloudy. Lithia Spring Major pushes about 35 million gallons a day into the Alafia at a steady 72 degrees.

Joint sand lost on long driveways

Summers around Tampa Bay are hot and humid with frequent thunderstorms. A long Lithia drive has a lot of joint to lose, and hard rain moves sand along the slope. Open joints widen and let weeds start. Every sealing job puts fresh sand back, so the weeds you pull now are your sign that the sand has run low. Ask the contractor to look at the low end of your drive, where the washed-out sand usually collects. On a long drive, the sand collects at the bottom, near the road.

Coats that are showing their age

Newland Communities bought 3,000 acres in the late 1990s to build Fishhawk Ranch, so some pavers in the area have had many summers of sun. A tired coat looks chalky, loses its sheen and lets water soak in. Before anything new goes on, the contractor has to find out what the old product is. If the old coat is solvent-based, a water-based one cannot follow it. A test patch lets the contractor see how the old coat reacts before the full job starts.

Neighborhoods

Is sealing different on a FishHawk Ranch street and a rural Lithia lot?

It can be, because the two kinds of property run on different rules. Newland Communities bought 3,000 acres in the late 1990s to build Fishhawk Ranch, and Fishhawk Trails was built by another company. Those streets have HOA standards, while a rural lot may have none. Tell the contractor which one you live on when you request a free quote.

Rural Lithia has strawberry growers, citrus, blueberries and tropical fish farms, and many people drive to MacDill Air Force Base for work. Big lots mean long drives and plenty of sprinkler heads. Well water is common out here, so rust shows up more often than salt. Call (656) 254-3751 and describe how far your driveway runs.

Inside an HOA, Florida law lets the association review the look of improvements only as far as its declaration or published guidelines allow. It must apply those standards fairly to every owner. Pull your community's guidelines before the work, and ask the contractor for the sealer name and finish. Once you have those, request a free quote.

Pricing

What does paver sealing cost in Lithia?

The going published range around Tampa Bay is $1.50 to $2.50 per square foot for cleaning, sanding and sealing. A big Lithia lot with a long drive, a pool deck and a lanai adds up quickly, even at a steady rate. Rust and green film push a job toward the top of the range. To see where yours lands, request a free quote and ask for total square footage in writing.

Access plays a part too. A wide open drive moves faster than a tight lanai behind a screen enclosure. Pavers that settled on low, wet ground need repair before any sealer. Phone (656) 254-3751 to learn which of these fit your Lithia lot.

Paved areaTypical exampleClean, sand and seal
300 sq ftSmall patio or walkway$450 to $750
600 sq ftTwo car driveway$900 to $1,500
1,000 sq ftLarge driveway or pool deck$1,500 to $2,500
1,500 sq ftDriveway plus pool deck$2,250 to $3,750

Math based on the $1.50 to $2.50 per square foot that Tampa Bay paver companies publish. Your contractor sets the actual price after seeing the surface. Repairs, leveling and stripping failed sealer are usually extra.

Get a Free Estimate

Contractors sealing a paver driveway at a home in Lithia
How it works

How does a paver sealing job work in Lithia?

Read the lot

The contractor checks drainage, trees and sprinklers across your Lithia property and marks any sunken pavers. An old coat gets identified, because a water-based sealer cannot go over a solvent-based one. The visit starts at the road and follows the whole drive.

Rust out, film off

Iron stains from well water are treated first, since pressure alone does not lift them. Then the wash clears green film, leaf stain and tire marks. Pool decks and screened lanais get these steps too, since wet feet cross them every day.

Sand back in

Because the wash pulls sand from the joints, new sand goes in ahead of the sealer. A drive with years of lost sand takes longer at this stage than you might think. Ask whether the sand is brushed in by hand or blown, so you know what to expect.

Dry first

Shaded corners and low ground near the river can stay damp long after the sunny drive is ready. A careful contractor checks the surface and the forecast, then waits rather than sealing damp stone. Lithia sits as low as 8 feet above sea level near the springs, so the wait can be longer there.

Seal and stay off

Sealer is the last coat, in the finish you picked. A wet look shows scuffs sooner than matte, which matters where cars park every day. Most quotes allow two to five years before the next coat, so write down the product name. Keep vehicles, pets and sprinklers off the surface until the contractor says it has cured.

Services

Complete paver services in Lithia

On a Lithia property the order never changes. Rust gets treated, the surface gets washed, joint sand goes back in, and sealer goes on last. Large lots stretch each step, so ask for a time estimate when you call (656) 254-3751.

Think about what you have. A long drive gets sun and tires, a lanai gets wet feet, and a path under trees goes green. When you request a free quote, list each one so the wash fits the surface.

Your choices are water-based or solvent-based sealer, in matte or wet look. If the old coat is solvent-based, a water-based one cannot follow it. Matte hides scuffs longer on a drive with daily traffic. Call (656) 254-3751 to talk it through.

Summer storms are frequent around Tampa Bay and sealer needs dry pavers, so leave some give in the date. Low ground by the springs may be the last spot to dry. Quotes run two to five years to the next coat. To choose a date, request a free quote.

Questions to ask before you hire

  • How will you work out my square footage before the price is final?
  • Does the finish come in a wet look and a natural look, and can I see a sample first?
  • Is your sealer a surface coating or one that soaks in, and which suits my pavers?
  • Can you get rust from sprinkler water out of the pavers before you seal?
  • My pavers were sealed before and now look cloudy. Can that be fixed?
  • How long until I can walk on the pool deck and drive on the driveway?
  • Can you send proof of insurance before the day of the work?
Photos

What do sealed pavers look like around Lithia?

Freshly sealed paver driveway near Lithia
Sealed paver pool deck near Lithia
Sealed paver patio behind the home near Lithia
Sealed paver walkway to a front door near Lithia
Close view of freshly sealed pavers near Lithia
Paver area with one cleaned half beside a dirty half near Lithia
Contractor cleaning pavers near Lithia
Contractor sealing or sanding pavers near Lithia
Contractor talking through a paver sealing estimate with a homeowner in Lithia
Local

Why local matters in Lithia

A rural lot and a FishHawk Ranch street need different plans. One may run on a well and the other under HOA rules, and a Lithia contractor will ask which you have. Someone from across the county may not. For a contractor used to country lots and HOA streets, call (656) 254-3751.

Ground matters here too. Land near Lithia Springs and the Alafia sits low and stays wet, while higher ground drains faster. A local contractor builds the schedule around that. When you request a free quote, ask how a date is picked around summer storms.

Rules count in the newer neighborhoods. A contractor who has dealt with HOA boards knows to bring the sealer name, the finish and a written scope for approval. That saves a second trip. Name your street and your HOA when you request a free quote, with no pressure to hire anyone.

Local roots

How did Lithia get its name?

Around 1900, lithium turned up in the waters of a spring now called Lithia Spring Major, and the community took its name from it. The spring pushes an average of 35 million gallons a day into the Alafia River at a steady 72 degrees. Lithia Springs Park, which covers 160 acres, was leased to Hillsborough County in 1957. If you live near the park, request a free quote.

James Alderman built a ford across the Alafia in 1848, where Alderman's Ford Park now sits, and his cattle ranch grew to about 30,000 head. Jules Verne placed a moon launch on the river in his 1865 novel, and Lithia is the closest community to that spot. The Alafia River Corridor and Chito Branch Reserve fill much of the land today. Near any of these Lithia landmarks, call (656) 254-3751 and name your street.

Questions

Frequently Asked Questions

Can homeowners seal their own pavers, or is it better to hire a contractor in Lithia?

Most Lithia homeowners hire a contractor, because the job needs a wash, new joint sand, a dry surface and the right sealer. Rust from well water and old coats add steps. Hiring out also gets you a written scope you can show an HOA board.

When do pavers in Lithia need resealing?

The span companies commonly quote is two to five years from one coat to the next. Sun, shade and traffic decide where you fall. If water soaks in and darkens the pavers after a heavy rain, the coat is wearing out.

How much does it cost to seal outdoor pavers in Lithia?

Published Tampa Bay prices run $1.50 to $2.50 per square foot to clean, sand and seal. A large Lithia lot costs more in total because there is more area. Rust treatment or repairs, when needed, can raise the number.

Is it better to spray or roll paver sealer in Lithia?

Many contractors spray the sealer and then roll it to work it into the joints, though methods vary. The result matters more than the tool. Ask what method will be used and whether the sealer goes down in one coat or two.

Does my HOA in Lithia need to approve paver sealing?

It depends on your declaration. Florida law lets an HOA review the look of improvements only as far as its declaration or published guidelines allow. A page listing the product, finish and work is usually enough for the board.

Will well water rust stain my Lithia pavers?

It can. University of Florida extension says most well water in the state is high in iron, and irrigation with it leaves orange streaks. The stain is treated before sealing so it is not locked in under the coat. University of Florida extension lists water softeners, oxidizing filters and chlorination with filtration as ways to treat iron in the water itself.

What do worn pavers look like before they need sealing in Lithia?

Signs include faded color, weeds in the joints, green film and water that soaks in instead of beading. Chalky patches and loose sand mean the coat is thin. A contractor can check these on a free visit.

How long does sealing take on a large Lithia driveway?

Time depends on the area, the stain work and the drying. Washing and sanding come first, then sealer goes on a dry surface. Ask how many days to plan for and how long to stay off the pavers. A big lot with a pool deck can take longer than a plain drive. Ask about crew size too, since it changes how many days the job takes.

What if my Lithia pavers sit near the river and stay damp?

Damp pavers grow green film faster, and sealer needs a dry surface before it goes on. The contractor washes the film away, waits for a dry day and puts sand back in the joints first. Pavers that stay wet all year may need a closer look at drainage.

Can a Lithia contractor reach my pavers if the lot is down a long private road?

Yes, though access can add time. Describe the road, the gate and where the contractor can park. A longer approach can show up in the estimate as travel and carrying time.

Do pavers near Lithia Springs or the Alafia need anything special?

Land near the river runs low and stays damp, so the wash and the wait for a dry surface matter more. The Alafia floods at a moderate to high level about twice a year, and nearby homes often stand on stilts. Ask the contractor to check drainage before sealing.

Is it worth sealing my Lithia pavers before I sell the house?

A clean, evenly colored drive and walk give buyers a good first look, and a coat helps hold the color. Ask for a written scope you can show an agent. The estimate is free.

Ready for a Free Estimate in Lithia?

Call (656) 254-3751 and tell us about your pavers.

Call (656) 254-3751

Free, no obligation