Click To Call(656) 254-3751Click To Get A Free Estimate
Paver driveway with a darker restored panel and a faded gray panel beside a mailbox and a young oak

Faded, cloudy or patchy pavers made even again

Paver Restoration and Resealing in Riverview, FL

Call (656) 254-3751 and a local contractor will look over worn Riverview pavers and quote a full restoration.

  • Brings out deeper paver color
  • Fresh joint sand helps lock pavers in place
  • Gives weeds less room to grow
  • Makes the surface easier to keep clean
  • Free estimate, no obligation

Request a Free Estimate

Free, no obligation.

Step 1 of 2

Where are your pavers?

Please choose one.

Free EstimateNo obligation
Fast ReplyWithin 1 business day, usually much sooner
Typical Local Price$1.50 to $2.50 a sq ft to clean, sand and seal
Call Now(656) 254-3751

Who restores worn pavers in Riverview, and when will they get back to me?

A local contractor restores and reseals pavers around Riverview, FL, and you will have a reply within 1 business day, usually much sooner. The visit and the price carry no charge or obligation. To get on the list, call (656) 254-3751.

Restoration is for the driveway that has gone chalky, the patio with a patchwork of old repairs or the walk where sealer has clouded over. It reaches past a simple wash and coat, because the old finish, the joints and the color all get a look before any new sealer goes down. Describe the worst patch of pavers in your yard when you request a free quote.

Call (656) 254-3751

Fresh sand swept into paver seams after a stripped section was rinsed, with a gray untouched strip beside it
Restoration

Does my Riverview driveway need restoring or only resealing?

A reseal suits pavers that are sound, with a coat that has worn thin. Restoration fits when more is wrong: sealer that is peeling or cloudy, joints that have emptied, color that has faded unevenly or places that have settled. A Tampa Bay company with a Riverview page lists sealer stripping, repair and leveling and tinting as separate services next to sealing. Which pile yours belongs in shows up during a visit, so call (656) 254-3751.

The same company names the common signs: weeds, fading, uneven pavers, efflorescence, failed sealer, stains and lost joint sand. Two or three of those at once point toward restoration. To have a contractor count them, request a free quote.

How it works

What is the first step in the restoration process?

Peter's Pressure Washing describes the opening step as an assessment of the paver condition and of any sealer already down. That tells the contractor whether the old coat must be stripped or can be washed and recoated. A test patch shows how a new sealer reacts. Say what you remember about past coats when you call (656) 254-3751.

How do contractors strip old or cloudy sealer from pavers?

Cleaning removes dirt, old sealer residue, efflorescence and growth, according to Peter's Pressure Washing. Premier Pro Wash and Seal says cleaning chemicals have to be neutralized before sealer goes on, or they can react with it. Unilock says a whitish film is trapped moisture, heavy application or a mismatched product. Failed sealer comes off before anything new goes down. Ask what product will be used when you request a free quote.

Stripping adds labor, and so does stubborn residue near the garage door. Treat the price as a range until the contractor has seen the surface. For a closer look at a peeling patch, call (656) 254-3751.

Can pavers be tinted to even out faded or mismatched color?

Yes. Rusty's Pro Wash and Seal says a semi-transparent tint soaks into the paver instead of sitting on top, so it resists cracking and peeling. The tint can match what is there or change it, and the company lists twelve colors, from Double Tan and Brick Red to Slate Black and White Wash. Tint can also blend patched or mismatched pavers. To ask about color, call (656) 254-3751.

Order matters on a tint job. The pavers are washed, the joints are refilled, the tint goes on by hand and a two-part water-based urethane sealer goes on with a pump rig, per the same company. A color change in a community with exterior rules may need approval, so check before you request a free quote.

What does it take to fix lost joint sand and sunken pavers?

A Tampa Bay company page lists lost joint sand among the common problems on Riverview pavers, and Washy Bear lists sand refills as part of its price. Premier Pro Wash and Seal replaced lost sand on a Riverglen pool deck before sealing it. New sand locks the pavers together and gives weeds less room. To have the joints checked, call (656) 254-3751.

Sealer does not cure a settled base. Unilock says sealing is not a fix for poor drainage, and Krystal Klean Exterior says sealing can wait while the cause is handled. Some Riverview lots sit low near the Alafia, which Wikipedia says floods at a moderate to high level about twice a year. If water pools on your pavers, say so when you request a free quote.

How long does a Riverview restoration take?

Plan on one to three days for an average yard. Premier Pro Wash and Seal says poor drainage can stretch a one day sealing job to two or three because the pavers must dry. Stripping and tinting add steps. A contractor can give a schedule for your yard when you request a free quote.

Which season suits restoration work in Riverview?

Choose a dry stretch. Unilock asks for clear skies for 24 to 48 hours around sealing, with temperatures between about 50 and 90 degrees. The National Weather Service dates the local rainy season from May 25 to October 10, and Peter's Pressure Washing mentions frequent afternoon storms and intense summer heat. Many owners aim for the drier months, though a contractor can work around the weather. To ask about a date, call (656) 254-3751.

How often should restored Riverview pavers be resealed?

Rusty's Pro Wash and Seal puts a coat at two to four years, and Unilock says three to five. A driveway with no shade sits near the short end, a covered patio near the long one. Peter's Pressure Washing suggests sweeping and a hose rinse in between and says to avoid harsh chemicals and high pressure. To plan the next coat, request a free quote.

What should I ask a contractor before a restoration starts?

Ask what will be done to the old sealer, since stripping and washing are different jobs with different labor. Ask which sealer goes on, and whether it is applied with a pump rig or a roller, because Rusty's Pro Wash and Seal says it uses a pump rig for its two-part urethane. Ask how the joints will be filled and what sand is used. To bring that list to a visit, call (656) 254-3751.

Ask about the extras too. Premier Pro Wash and Seal cleaned the lanai screens and frame on its Riverglen pool deck job, so screens, landscape beds and lights are worth mentioning. Peter's Pressure Washing says clients get guidance on drying times and when traffic can return. Write down the answers, then request a free quote.

Pricing

What does paver restoration cost in Riverview?

Rusty's Pro Wash and Seal lists $1.75 to $3.00 per square foot for most residential tinting and sealing projects, and says heavily faded or stained surfaces cost more. Washy Bear lists $1.50 to $2.50 for washing, filling joints and sealing. The table shows both. Stripping, leveling and tint colors are what separate a low bid from a high one. For a written number, call (656) 254-3751.

Ask each bidder to list every step, so you can compare like with like. Send your measurements when you request a free quote.

Paved areaWash, sand and reseal, $1.50 to $2.50Tint and reseal, $1.75 to $3.00
400 sq ft$600 to $1,000$700 to $1,200
800 sq ft$1,200 to $2,000$1,400 to $2,400
1,200 sq ft$1,800 to $3,000$2,100 to $3,600

No published page gives one rate for paver restoration as a whole, so the table sets two published pieces side by side. The first column uses the $1.50 to $2.50 range that Washy Bear lists for Riverview. The second uses the $1.75 to $3.00 that Rusty's Pro Wash and Seal lists for tinting and sealing. Stripping failed sealer and leveling are priced after a visit.

Get a Free Estimate

What do Riverview owners and associations expect from restored pavers?

Census estimates put about 84 percent of occupied homes in ZIP codes 33579 and 33569 in owner hands, so the finish is the owner's call. Washy Bear says Panther Trace and Rivercrest keep appearance guidelines, and an exterior cleaning company in Riverview says association letters about dirty driveways are a common reason homeowners phone. A restored, even surface answers those letters. To plan one, call (656) 254-3751.

Riverview went from 12,035 residents in 2000 to 107,396 in 2020, so a lot of pavers here have been through a decade or two of Florida sun. Say when your pavers went in when you request a free quote.

Photos

What do restored pavers look like at Riverview homes?

Freshly sealed paver driveway after a restoration in Riverview
Sealed paver pool deck after a restoration in Riverview
Sealed paver patio behind the home after a restoration in Riverview
Sealed paver walkway to a front door after a restoration in Riverview
Close view of freshly sealed pavers after a restoration in Riverview
Paver area with one cleaned half beside a dirty half after a restoration in Riverview
Contractor cleaning pavers after a restoration in Riverview
Contractor sealing or sanding pavers after a restoration in Riverview
Questions

Frequently Asked Questions

How can I make my old pavers look new again?

Start with a wash that removes algae and old sealer, then refill the joints with fresh sand and seal. A Riverview company says a semi-transparent tint can even out faded or mismatched pavers before the sealer goes on. A contractor can tell you which of these your surface needs.

How often should I seal pavers in Florida?

Plan on every two to five years. Rusty's Pro Wash and Seal says a coat lasts two to four years in Riverview, while Unilock says three to five. Sun, tires and sprinklers shorten that, and a shaded patio can stretch it.

Do you need a license to do pavers in Florida?

It depends on the work. Cleaning and sealing are not the same as building or rebuilding a paver surface, so ask which license covers any leveling or repair in your quote. The Florida Department of Business and Professional Regulation keeps a public license search you can check.

Is there a downside to sealing pavers?

There are three. A coat costs money, it has to be redone every few years, and a high gloss can feel slick when wet. Matching a new sealer to an old one matters too, and a trial patch shows how the two get along.

Can I seal my pavers myself?

You can, and some owners do, but the result depends on the prep. Premier Pro Wash and Seal says a poor sealer choice can turn blotchy, yellow or flaky within months. A contractor can wash, sand and coat the whole job so the finish dries evenly.

What is the average cost to restore and reseal pavers in Florida?

Rusty's Pro Wash and Seal lists $1.75 to $3.00 per square foot for tinting and sealing most residential projects in Riverview. Washy Bear lists $1.50 to $2.50 to wash, fill joints and seal. Stripping failed sealer and leveling add to either figure.

What is the difference between resealing and restoring pavers?

Resealing adds a coat to pavers that are still sound. Restoration covers the harder cases: stripping old sealer, refilling joints, leveling sunken spots or evening out color. A Tampa Bay company lists each as its own service.

Can cloudy or peeling sealer on Riverview pavers be fixed?

Often yes. Unilock says a whitish film comes from trapped moisture, too much product or a new sealer that does not match the old one. Peter's Pressure Washing says its cleaning removes old sealer residue before a new coat goes on.

Will new paver sealer fix pavers that have sunk?

No. Sealing does not cure a drainage or base problem. Pavers that rock or dip need leveling first, and Krystal Klean Exterior says sealing can wait until the cause is fixed.

Ready to bring tired pavers back?

Use the form or call, and you hear from a contractor in 1 business day at the most, usually sooner.

Call (656) 254-3751

Free, no obligation