Click To Call(656) 254-3751Click To Get A Free Estimate
Red brick paver entry walk and porch in Riverview with a fresh coat of sealer and clean joints

Keep rain, oil and mold from soaking into brick

Brick Paver Sealing in Riverview, FL

Call (656) 254-3751 for a free estimate to wash, sand and seal the brick pavers at your Riverview home.

  • Brings out deeper paver color
  • Fresh joint sand helps lock pavers in place
  • Gives weeds less room to grow
  • Makes the surface easier to keep clean
  • Free estimate, no obligation

Request a Free Estimate

Free, no obligation.

Step 1 of 2

Where are your pavers?

Please choose one.

Free EstimateNo obligation
Fast ReplyWithin 1 business day, usually much sooner
Typical Local Price$1.50 to $2.50 a sq ft to clean, sand and seal
Call Now(656) 254-3751

Is there a local contractor for brick paver sealing in Riverview?

Yes, a local contractor seals brick pavers throughout Riverview, FL, and replies within 1 business day, often much sooner. The estimate costs nothing and a no is always fine. To reach one, call (656) 254-3751.

Brick looks warm and classic around a Riverview entry, walk or patio, yet it drinks water like a sponge once the surface wears. Sealing cuts that thirst, shields the color from sun and keeps the joints steadier. Please say whether the surface is clay brick or a brick-style concrete paver, and mention how old the sealer is, when you request a free quote.

Call (656) 254-3751

Contractor holding a brick paver beside a wet test patch on a Riverview front walk
Why choose us

Why does unsealed brick struggle in a wet climate like Riverview's?

Washy Bear says unsealed brick absorbs rainwater and vehicle fluids, which lets mold, weeds and ant mounds spread through open joints. It also says sealing stops that absorption and protects against UV fading. The Alafia River runs through the north of Riverview, according to Wikipedia, and Washy Bear cites the river as a source of damp that feeds growth on nearby surfaces. To have your brick checked, call (656) 254-3751.

Water it soaks up

Rain sinks into bare brick and stays, which feeds algae in shaded corners.

Fluids it holds

Oil from a car or grease from a grill can darken brick for good if it is not sealed.

Joints that open

Weeds and ant mounds start where sand has washed out of the seams.

Color it loses

Sun fades the red and brown tones, and a coat helps hold them.

Can any cleaner go on my brick before sealing?

Not any cleaner. Pine Hall Brick says some brick cannot be wet cleaned and tells owners to check the tag or ask the maker for special instructions. It also says color comes from raw materials and firing, and that brick varies a little run to run. A contractor tests a hidden spot before washing the whole area. To ask how yours will be handled, request a free quote.

Which sealer and finish fit brick pavers?

Ask for the product by name, plus the reason it suits your brick. Washy Bear describes a clear acrylic with a natural matte look and a semi-gloss wet look that deepens color. Unilock says solvent-based sealers give high shine, while water-based ones suit low-gloss looks. Rusty's uses a water-based acrylic urethane in four sheens. Pick a finish you can live with in the rain, and request a free quote.

Slip is worth a thought on a front step or a pool-side brick path. Unilock says high gloss can be slippery when wet, so a matte or mid-gloss sheen is the safer pick where feet get wet. Coverage varies too, from 80 to 120 square feet per gallon for solvent-based and 100 to 150 for water-based, per Unilock, so ask how many gallons your area takes.

How is brick paver sealing done from start to finish?

The process runs wash, joints, seal and cure, with a test patch in front of it. Sunshine State Power Wash says it adds ASTM C144 joint sand and applies two coats, the first soaking in and the second building the final look. Premier Pro Wash and Seal checks the pavers, sand and any earlier treatment before it starts. To book a look, call (656) 254-3751.

Brook Pressure Washing found uneven absorption on a Riverview driveway because of porosity and blended the extra coats to even it out. Brick can behave the same way, so a patient crew goes slowly. Plan on about 24 hours before walking on it and about 48 before parking, per Washy Bear.

Pricing

What does brick paver sealing cost in Riverview?

No Riverview company publishes a separate brick price, so this table is built from the published pieces that do exist: the full rate to wash, sand and seal, and a lower rate that some companies quote. Washy Bear lists $1.50 to $2.50 per square foot and Rusty's Pro Wash and Seal lists $1.00 to $1.75. Brick sometimes needs a test patch or an extra coat, which can add time. For a written number, request a free quote.

Condition changes the total. Premier Pro Wash and Seal says old failed sealer may need removal, and that rust, efflorescence and oil each need different chemicals. Krystal Klean Exterior says a quote from square feet alone is not enough and wants an inspection. Holding a bid from another company? Call (656) 254-3751 and set it beside these ranges.

Brick areaTypical spotAt $1.00 to $1.75 (Rusty's)At $1.50 to $2.50 (Washy Bear)
150 sq ftEntry walk$150 to $262$225 to $375
300 sq ftFront porch and path$300 to $525$450 to $750
500 sq ftBack patio$500 to $875$750 to $1,250
800 sq ftPatio and side yard$800 to $1,400$1,200 to $2,000

Math from the two published ranges, since no page prices brick alone. Rusty's lists $400 to $900 and up for patios and pool decks, and Sunshine State Power Wash states an $899 minimum project price. Repairs, stripping and tint are usually extra.

Get a Free Estimate

Brick paver patio under a lanai roof with a sealed finish and clean joints beside a planter

How long does sealed brick last in Riverview?

Count on a fresh coat of sealer somewhere between year two and year five. Washy Bear says every two to three, Rusty's says a coat lasts two to four, and Sunshine State Power Wash says three to five, with about three often best given Florida sun. Shaded, damp brick may need a wash in between. To plan your own schedule, call (656) 254-3751.

Should I wait before sealing new brick pavers in Riverview?

Yes, for a while. Unilock says to wait 60 to 90 days after installation and to seal only after the white efflorescence haze has fully cleared, which can take two to three months or up to a year. Rusty's suggests sealing new builds within about 60 to 90 days of move-in. Mention the month the pavers went in when you request a free quote.

Will Riverview sun fade my brick pavers?

The National Weather Service puts summer highs in the upper 80s to mid 90s in this part of Florida. Washy Bear says sealing protects brick against UV fading, and Unilock says sealer helps pavers resist fading from strong sun. A driveway or patio with no shade takes the most. To ask about protecting yours, call (656) 254-3751.

What does a test patch tell me about my brick?

A test patch shows how the brick reacts before the whole area is coated. Pine Hall Brick says color varies a little from run to run, and Brook Pressure Washing saw uneven absorption from porosity on a Riverview driveway. A small spot that nobody sees shows the sheen and how much sealer the brick drinks. Ask for a patch when you request a free quote.

How should I get my brick ready for the contractor's visit?

Move furniture and planters off the brick, point out oil or rust spots and note where water stands after rain. Krystal Klean Exterior says damp low spots can postpone a film-forming coat, and Unilock says sprinklers should stay off. A short list of these things speeds the quote. To send yours, call (656) 254-3751.

Photos

How does sealed brick look around Riverview?

Freshly sealed paver driveway at a Riverview entry and walk
Sealed paver pool deck at a Riverview entry and walk
Sealed paver patio behind the home at a Riverview entry and walk
Sealed paver walkway to a front door at a Riverview entry and walk
Close view of freshly sealed pavers at a Riverview entry and walk
Paver area with one cleaned half beside a dirty half at a Riverview entry and walk
Contractor cleaning pavers at a Riverview entry and walk
Contractor sealing or sanding pavers at a Riverview entry and walk
Questions

Frequently Asked Questions

How often should I seal pavers in Florida?

Plan on two to five years. Washy Bear says every two to three, Rusty's Pro Wash and Seal says a coat lasts two to four and Unilock says three to five. Brick that takes full sun and rain in Riverview leans toward the shorter end of that span.

How do I clean my outdoor brick pavers?

Start by checking what the brick maker says. Pine Hall Brick notes that some brick cannot be wet cleaned and tells owners to read the tag or ask the manufacturer. Because of that, a contractor should look at the brick before choosing any cleaner.

What is the average cost to seal pavers in Florida?

Washy Bear lists $1.50 to $2.50 per square foot to wash, sand and seal in Riverview. Rusty's lists $1.00 to $1.75, and Premier Pro Wash and Seal gives $1.50 to $2.00 for the region. No Riverview page lists a separate brick rate.

Is sealing brick pavers a good idea?

Often yes. Washy Bear says unsealed brick takes in rainwater and vehicle fluids, which lets mold, weeds and ant mounds spread through open joints, and that sealing stops the absorption and guards against UV fading. Test a small patch first, because brick varies.

How much does it cost to seal outdoor pavers?

At Riverview rates of $1.00 to $2.50 per square foot, a 400 square foot brick patio lands between about $400 and $1,000, depending on the company and what the price includes. Rusty's lists $400 to $900 and up for patios and pool decks.

Why does brick need a different sealer than concrete pavers?

Brick is fired clay, and it takes in liquid at its own rate. Brook Pressure Washing says not all pavers are the same and that porosity is one of the many variables it deals with. Unilock lists coverage that varies from 80 to 150 square feet per gallon by product.

Will sealing change the color of my brick?

It can deepen it. Washy Bear describes a clear matte acrylic that leaves a natural look and a semi-gloss wet look that deepens color. Pine Hall Brick says color comes from raw materials and firing and varies a little from run to run, so test before coating the whole area.

Does the joint sand matter on brick?

Yes. Washy Bear says its joint sand is stabilized to ICPI guidelines, and Krystal Klean Exterior uses ASTM C144 sand on standard interlocking pavers. Full joints keep brick from shifting and keep weeds and ants out.

Will sealed brick stop all stains?

No. Xcellent Xteriors says sealing does not make pavers stain proof, but it can make cleanup easier by reducing how much oil, dirt and rust soak in. Wipe up fresh spills and let a contractor handle old marks.

Can brick be sealed if it has white haze on it?

Wait. Unilock says to seal only after efflorescence is completely gone, which takes two to three months and sometimes up to a year on new pavers. Premier Pro Wash and Seal says efflorescence needs its own chemical, neutralized before any sealer goes down.

Want your brick sealed against Riverview rain?

Call or use the short form, and a contractor replies within 1 business day, often earlier.

Call (656) 254-3751

Free, no obligation